These flavors will make your taste buds go crazy. Crafted by veteran California mix-masters at Ruthless E-Juice with the highest quality ingredients.Glazed Donuts
Mouthwatering, warm right out-the-fryer donut, topped with a sugar glaze.
Crisp graham cracker around melted marshmallow with chocolate oozing from the center.
120ml bottles VG/PG: 70/30
The first liquid line created with 100% Tobacco Free Nicotine, NKTR by SQN has changed the future of eliquid flavors!
NKTR was created to be delicate and balanced on the palate with a crisp, juicy pop! By using TFN, which has virtually no smell or taste of its own, NKTR is able to provide deep, complex flavors that stick to a simple and clean profile.
Take a bite into this fresh, ripened pear that starts with a clean, delicate inhale and finishes with a juicy, mouthwatering exhale.
Guava's bright and unique tropical flavor will leave your mouth watering from the first inhale to the very last exhale.
Just like a perfectly ripened tropical mango, the bright flavor and sweetness of Mango carries throughout from inhale to exhale.
30ml bottles 70/30 VG/PG
Birthday Pancakes is a warm short stack of flavorful pancakes with a delicious vanilla cake frosting caked over the top and finished perfectly with sweet sprinkles. You new all day Vape! Thick and satisfying clouds of deliciousness…
You have to pick up this juice you won’t regret it !
Birthday Pancakes is manufactured from start to finish in a ISO certified clean room facility.
30ml Bottles 75/25 VG/PG
The Sigelei 213 introduces brand new features and industry first advancement in many areas. TFR and TCR will take vaping in temperature control to new levels for even more vaping precision. The body has soft touch carbon fiber and aluminum space frame trimming making it sturdy and lightweight. Sigelei has totally redesigned the OLED screen and menu layout to display the battery voltage of each cell installed into the device and the output amperage to present essential information to the user. The most unique aspect of this box mod is its unique power up configuration technology. It allows you to set the exact way you would like the mod to fire. For example, you can set a higher power level when you begin a puff and allow the unit to throttle down the wattage along the way, or vice versa. Whatever your preference!Another new first for the Sigelei 213 is its capability of charging batteries at 2A each. Sigelei has taken extreme measures to ensure a high quality unit that performs above expectations while perfecting new and precise features to crush the competitions top of the line high wattage box mods.Available in Gun Metal.
Material: Carbon Fiber Reinforced & Aluminum Space Frame
Wattage Range: 10W – 213W
Temperature Range: 200°F – 570°F / 100°C – 300°C
Voltage Output: 1.0V – 7.5V
Voltage Input: 6.4V – 8.4V
Requires (2) 18650 Batteries
Firing Modes: VW, TC (Ni200, Ti, SS), TCR (Temperature Coefficient Of Resistivity), TFR (Temperature Factor Of Resistivity)
Resistance Range: 0.1Ω – 3.0Ω
Fast Balance Charging Support (Micro USB): DC5V/2A
Brass 510 Pin
Spring Loaded 510 Pin
New OLED Screen Layout
Battery Door PanelPackage Contents:1 x Sigelei 213W
1 x User Manual
1 x Micro USB Cable
1 x Security Code Card
A vanilla cupcake drizzled in sweet strawberry frosting, topped with sprinkles. This delicious and succulent juice comes in a 60mL bottle ready for comsumption. A warm creamy cupcake all in an ejuice bottle.
60ml Bottle in a 70/30 VG/PG Blend
If you want a small mod with all the features of a top of the line dual 18650 box mod, the Nugget by Artery is the answer. This tiny mod is capable of producing 50W of power at up to a 20 Amp continuous discharge. The temperature control functions are ready to go for Ni200 and Titanium wire. Follow the link below and the instructions to upgrade the firmware with the included Micro USB cord to add Stainless Steel temperature control functionality. Pass through is always a great feature when your battery is low.
What makes the Nugget unique is the performance in an incredibly small size. Standing at only 55.5mm tall, this box mod is very easy to carry in your pocket and smaller than many sub ohm tanks. The internal 1000mAh battery is great for night out or a day of adventures, and charging this mod is super easy with the Micro USB cable.
- Dimensions: 55.5 mm x 31 mm x 22 mm
- Resistance Range: 0.1 Ω – 3.0 Ω
- Output Voltage: 0.5 V – 8 V
- Internal Built-in 18350 High Drain Battery
- 1000mAh Capacity
- Charge through Micro USB
- Maximum Continuous Discharge Current: 20 Amp
- Temperature Control for Nickel (Ni200) and Titanium (Ti 1)
- Temperature Range: 200°F – 600°F / 100°C – 315°C
- Firmware Upgradable to Stainless Steel TC Functionality
- Power Mode/Voltage Mode for Kanthal, NiChrome, Stainless Steel
- Output Wattage: 5 W – 50 W
- Micro USB for Firmware Upgrades, Charging & Passthrough
- Standard 510 Threaded
1x Nugget 1000mAh 50W TC Box Mod by Artery
1x User Manual
1x USB CableUpgrade firmware at http://www.arteryvapor.com/soft
The Model T RDA by EHPRO is by far one of the best and most affordable authentic rebuildable dripping atomizers on the market. This is a must for cloud chasers looking for great flavor. Countless airflow options, a sweet two post Velocity style build deck and large post holes make this a great RDA at a great price.
100% Authentic with unique serial number and QR code
Features and Specs:
Package includes:1 x Model T RDA 22mm1 x Wide bore drip tip1 x Allen Wrench1 x Bag Spares (Coils, Cotton, Orings and Screws)
- Airflow holes create a plethora of options to maximize flavor
- Airflow holes easily adjustable for any style coil
- 22 mm diameter
- Stainless Steel construction
- Two post Velocity Style design
- Large post holes to trap complex builds
- Heat sink top cap which new style drip tip to focus flavor
- Authentic Serial number with QR code
- Hex screws for both posts
- Very deep juice well
- Four piece design
- Wide bore drip tip option in package
- Gold coated contact pin for better current
The Wismec Centurion 100W TC Box Mod by Beyond Vape is built by Wismec with Beyond Vape’s design and they have created a beautiful mod. The Centurion features a maximum output of 100W coupled with full temperature control and 26650 and 18650 battery compatibility. It has an ergonomic and comfortable 26650 based body that also handles 18650 batteries as well. This fully functioned device offers a wattage range of 1 to 100 and the resistance range of 0.05Ω in TCR mode is supported in Nickel, Titanium and Stainless Steel.The firing button is very large and appropriately placed allowing for easy use with almost any grip size. A bright OLED screen makes quick peeks at the settings a joy. Included in the box is a 22mm decorative ring to aid in flush mounting, a 18650 battery sleeve to adapt the 26650 battery tube chamber and a micro usb port for future firmware upgrades and charging.
This mod is the whole package! Looks, features, battery options and quality materials.
Features and Specs:
- Single 26650 High-Amp Battery Size (Not included)
- Optional 18650 High-Amp Battery (Not included) w/ Sleeve Adapter (Included)
- Wattage Ouput Range: 1~100W
- Recommended Max Output for 18650: 75W
- Minimum Atomizer Resistance: 0.05ohm
- Temperature Control Range: 200-600F
- Ni200 Nickel , Titanium, and Stainless Steel Compatibility
- Temperature Coefficient of Resistance (TCR) Adjustments
- Unique Curvature Design
- Intuitive OLED DIsplay
- Three-Button Operation
- Trigger-Style, Oversized Firing Button
- Bottom-Loading Threaded Battery Cap
- Bottom Ventilation Holes
- Stealth Function
- Resistance Lock Function
- Wattage Lock Function
- Temperature Protection
- Weak Battery Alert
- Short Circuit Protection
- MicroUSB Port – Firmware Upgrades
- Spring-Loaded 510 Connection
The Sense Herakles sub ohm tank everyone loved has now joined the rebuildable world. From direct coil airflow, top fill function, and a wide bore drip tip all lovers of the original Herakles will be thrilled with the 2 post build deck design. Huge 2.5mm post holes means that the Herakles RTA can fit a larger amount of wire with little to no difficulty. A 6ml tank and a ton of spares finish out this kit.
This is the one to get!
- 25mm Diameter
- Velocity Style Build Deck
- 2.5mm Terminal Post Holes
- Adjustable Airflow
- Stainless Steel Construction
- Glass Tank
- Convenient Top Fill
- Wide Bore Delrin Drip Tip
- 6mL Tank
- Adjustable Liquid Control
- 1 x Herakles RTA Tank
- 1 x Spare Glass
- 1 x Screwdriver
- 8 x Spare Medium Clear O-Rings
- 2 x Small Clear O-Rings
- 2 x Large Clear O-Rings
- 4 x Large Black O-Rings
- 1 x Allen Key
- 1 x 510 Drip Tip Adapter
- 4 x Post Pins
- 1 x 510 Pin
Note: This is an advanced product and requires knowledge of rebuildable tank atomizers
Kangertech has introduced the TOP EVOD Starter Kit that features an incredible slim and sleek design designed for new vapers, casual users, or simply users that are constantly on the go.
The TOP EVOD Starter Kit is reminiscent of the original eGo style batteries such as the Vision Spinner, Joye eGo-T, and Kanger EVOD batteries. The TOP EVOD Kit has a 650 mAh EVOD Battery and a TOPTANK EVOD with a capacity of 1.7ml. The TOP EVOD Kit also includes (1) 1.5ohm VOCC-T which uses Japanese Organic Cotton. The new VOCC-T coil head is an updated version of the Kangertech VOCC heads but with many improvements like airflow, flavor and vapor production. The kit comes with a 510 USB Charger is included as well. You only require an additional purchase of e-Liquid and you’ll be ready to produce some serious vapor!
Note from the manufacturer: Charge your EVOD battery by connecting the USB plug to a USB source equal to or less than 5.0v. Do not use any 510 USB charger other than the one included in the TOP EVOD Kit.Features and Specs:
- Dimensions: 5-1/16″ x 7/16″ (Including the tank)
- Diameter: 14mm
- Simple One Button Design
- EVOD Battery: 510/eGo Threaded
- TOPTANK EVOD: eGo Threaded
- 1.7ml e-Liquid Capacity
- Top Fill Design
- Battery Capacity: 650mAh
- Output Voltage: 4.2
- Minimum Resistance: 1.5ohm
- Compatible with VOCC or the new VOCC-T Atomizer Heads
- (1) VOCC-T 1.5ohm Atomizer Head Included
- Glass Tank
- Airflow Base
- Removable 510 Drip Tip
- EVOD 510 USB Charger Included
- Input: DC 5v
- Output DC 4.2V/400mA
- Short Circuit Protection
- Low-Battery Warning Indicator
Warm, Sweet and Gooey. An enticing blend of delectable, sweet marshmallows baked into an exquisite home made desert! Everything you loved about a crispy treat packed into a bottle of pure savory perfection.
60ml Bottle – 75% VG 25% PG
Sigelei has introduced the one of a kind T150 Touch Screen Mod. The Sigelei T150 will fire up to 150 watts and features a unique color touch screen. The touch screen allows you to easily adjust your wattage, modes and settings. The beautiful touch screen allows for easy visibility when adjusting your settings. you can also lock the screen to prevent accidental adjustments.
The Sigelei T150 will also fire Ni200 Nickel coils using the temperature control mode. The Sigelei T150 is made with lightweight but sturdy aluminum alloy construction with an easily accessed magnetized battery cover. The device requires (2) high amp 18650 batteries which are sold separately.
Please note, the Sigelei T150 does NOT have a charging port and requires an external battery charger.
Features and Specs:
- Dimensions:3-5/8″ x 1-7/8″ x 1-1/16″
- Capactive Touch Screen
- Temperature Control Ni200 (Nickel) and Wattage Mode
- 510 threaded
- Atomizer Resistance Range: 0.2 ohm – 3.0 ohm (Wattage)
- Atomizer Resistance Range: 0.1 ohm – 0.5 ohm (Nickel Temperature Control)
- Variable Wattage Range: 5.0W – 150.0W
- Output Voltage Range: 0.35V – 8.4V
- Input Voltage Range 6.4V – 8.4V
- Temperature Adjustment Range: 200-600°F
- Maximum current: 30A
- Requires (2) High Amp 18650 Batteries (Sold Separately)
- Aluminum Alloy Construction
- Magnetized Battery Cover
- Screen Lock/Unlock Feature
- Input High Voltage Warning
- Low Voltage Protection
- Output Short-Circuit Protection
- Reverse Battery Protection
- Overheating Prevention
Please note: Temperature control requires the use of nickel coils only.
Kanger KBOX 120W Temp Control Mod
Introducing the KBOX 120W TC Mod. Kangertech has taken their KBOX series to the next level. Using a new chipset they have been able create a contoured box mod with wattage output to 120W and have incorporated a Temperature Control Mode. The KBOX 120W TC Mod will support Nickel, Titanium, Stainless Steel and Ni-chrome wire in temperature control mode. It can also fire atomizers as low 0.05 ohms in Temperature control and 0.10 ohms in Wattage Mode. The KBOX 120W TC Mod comes with a spring loaded 510 contact pin and requires dual 18650 high amp batteries. The device also has a micro USB port for charging and firmware updates!.
Features and Specs:
- Dimensions: 3-1/4″ x 2-1/4″ x 7/8″
- Spring-loaded 510 Contact Pin
- Wattage output: 7-120W
- Temperature Control : Ni / Ti / SS / Ni-chrome
- Temperature Control Range: 100 – 315C / 200 – 600F
- Resistance: 0.05ohm or above for Ni/ Ti/ SS Wire
- Resistance: 0.1ohm or above for Ni-chrome Wire
- LCD Display Screen
- Zinc Alloy and Aluminum Alloy Construction
- Requires (2) 18650 High Amp Batteries (sold separately)
- Micro USB Port for DC 5V at 1.5A and future firmware updates
- Micro USB Cable (sold separately)
- PCB with unique serial number
- 10 second cut off safety feature
- High temperature protection
- Reverse battery protection
- Short circuit protection
- Low battery warning
- Over-discharge protection
The need for a high wattage device with enough battery life to last over a few days has been fulfilled. Wismec has designed the Reuleaux RX200 and it is a beast. It requires 3 matching and mated 18650 batteries. The triangular shaped chassis integrates the batteries in an ergonomic shape. It houses a Joyetech chipset so reliability shouldn’t be an issue. With 200 watts of power, full temperature control for Ni200, Stainless steel and Titanium heating wire and a unique design there isn’t much more you need to know.
Pick your color and grab some new premium batteries to go with it here.
Note: This is not the DNA version
Features and Specs:
Triple 18650 Platform
New 200W Chip Set
Reverse Polarity Insert
Allows for Easy Exchange and Replacement
Batteries Sold Separately
Please Note: Batteries must be matched in brand and model at all times. Discharge and recharge batteries within the same grouping of three.
1 to 200W
0.1 to 3.5 ohms
Full Temperature Control
200 to 600 Degrees Fahrenheit
0.05 to 1.0 ohm
0.69 Inch OLED Screen
Designed By Jay Bo
Engraved with Jay Bo on Firing Button
Modern and Sleek Look
Magnetized Battery Bay
Ergonomic Shape and Feel
Recessed Control and Display Face
Gold Plated Contact
The Tesla Two is a compact unregulated box mod with two internal batteries to pack a powerful punch.
Note: This is an unregulated device and is recommended for experienced users
Note: The magenta red color is more a pink color then a red
Looking for the new Tesla Nano TC Starter Kit?
BOX MOD ONLY
- Material: Aluminum
- Threading: 510
- Dimensions: 22mm x 47mm x 76mm
- Positive Pin: Spring-Loaded Silver-Plated Copper
- Capacity: 4000mAh Internal battery
- Max Output Power: 100W
- Max Output Voltage: 4.2V
- Max Output Current: 40A
- Short Circuit Protection
- Overcurrent Protection
- Overvoltage Protection
- Resistance Range: 0.1Ω – 3.5Ω
- LED Battery Indicator: 3.2V – 3.65V > Red | 3.65V – 4.2V > Blue
Note: Micro USB cable not included
Complete Starter KitThe Tesla Two unregulated box mod features two internal batteries for a total of 4000mah. Use the included USB cord to charge the mod. The output voltage is fixed at a maximum of 4.2V when you are fully charged. Operation is extremely easy due to the fact that there are no adjustments to make. Hold the button to fire and click it 5 times to turn it on or off. The minimum resistance is 0.1ohm making it ideal for most RBA and sub-ohm tanks. No more bulky and heavy mechanical box mods when you have a Tesla Two.The VORTEK TC Subtank has a stainless steel construction and large glass tank. A 0.5ohm coil head comes installed and the kit also includes a replacement 0.2ohm backup. Easy to adjust dual airflow ports on the tank and an innovative eliquid flow control located on the coil heads makes this unique. The wide bore drip tip will enhance the flavor and vapor production and is also provided as part of this starter kit.Aesthetically pleasing, perfect for all users, extremely well designed and manufactured the only thing required is some eliquid to function.Starter Kit includes:
- 1 x Tesla Two Sub MOD
- 1 x Tesla Vortek Sub Tank(0.5ohm)
- 1 x Tesla Vortek Sub Tank coil(0.2ohm
- 1 x Tesla USB cord
- 1 x User Manual
- 1 Tesla Two Box Mod
- 1 Tesla Vortek
- 1 Replacement coil
- 1 Micro USB Cable for charging
- 1 User Manual
The Laisimo L1 200W TC Mod has arrived to set a new standard for high wattage box mods as it looks like nothing you have ever seen before. The Laisimo L1 200W TC can fire anywhere from 5W to 200W and temperature controls Ni200(Nickel), Titanium, and Stainless Wire. The Laisimo L1 200W TC has a huge 2.4 inch OLED colored display screen which allows you access to your mods settings. It can handle resistances as low as 0.05Ω and has a temperature control range of 212 to 572F.
Laisimo L1 200W TC has the ability to use the special Laisimo L1 Android 4.4 APP using the Bluetooth 4.0 functionality. (Only available for Android Phones) The Android APP allows you to change your power or temperature control setting with the “Mode” button on your Android Phone. There are many other groundbreaking features and future firmware upgrades to add more fuctionality. The micro USB port allows you to download any future firmware.
Features and Specs:
Dimensions: 4” x 2” x 1”
Bluetooth Laisimo L1 Android APP
Wattage Output: 5.0 – 200.00W
Voltage Output: 0.5 – 7.5V
Temperature Control : Ni200 / Titanium / Stainless Steel
Temperature Control Range: 100 – 300C / 212 – 572F
Temperatue Control Wattage Output: 5.0 – 70.0W
Resistance: 0.05ohm – 2.5 ohm (Kanthal, Ni200, Ti, SS)
Battery Voltage Range: 6.2V – 8.4V
Large 2.4 Inch OLED Colored Display Screen
Dual Magnet Battery Cover
Requires (2) 18650 High Amp Batteries (sold separately)
Requires an External Charger (sold separately)
Micro USB Port for Future firmware updates
Low voltage protection
Low resistance protection
Input high voltage warning
Short circuit protection
Reverse battery protection
The Laisimo L1 200W APP for Android 4.4 may be obtained at this link:
The iPV5 200W TC Box Mod by Pioneer4you is HERE! It has the Yihi SX330-200 Chip. Temp Control functions are ready to go for SS/Ni200/Ti wire. It is the progressive evolution from the sensational iPV series, capable of delivering an impressive 200 watts of power. The iPV5 was engineered to encompass a huge power range using dual 18650 batteries for a greater power ceiling in comparison to previous iPV box mods. Under normal use and temperature control setting, the new Yihi SX330-200 chip is capable of extreme precision and efficiency ratings for personalized regulation. The iPV5 is cleverly built with an intuitive OLED display and ergonomic layout for a seamless vaping experience.
Available in Black, Blue, Silver, Red and White.
Output Power: 10W-200W
Output Joule: 10 Joules – 100 Joules / 120 Joules for Titanium
Standard Resistance: 0.15ohm – 3.0ohm
Joule Mode Resistance: 0.05ohm – 1.5ohm
Output Voltage: 1.0V – 7.0V
Output Current: 1.0A – 45.0A
Temperature Range: 212-572 Farenheit
Utilizes Yihi SX330-200 Chip
Accepts 2×18650 Battery (sold separately)
Maximum 200 Watt Output
Temp Control with SS/Ni200/Ti Wire
Customizable Logo by GUI
Magnetic Battery Door Panel
The Wismec Presa is inspired by an ergonomically sculpted design to fit your hand. The enlarged button is designed so the Presa can be griped comfortably in all positions. The arc design makes it a perfect fit for your palm. One can view battery power/vaping seconds/working voltage/wattage clearly from the OLED screen. The Presa adopts two kinds of lock function: manual fire button lock function( Move the lock switch which is located on top of battery ) and up/down adjustment buttons lock function( hold the up/down adjustment buttons simultaneously for 2 seconds to lock/unlock ). There are two modes for users to adjust the working condition of Presa: VV mode and VW mode. By pressing the fire button 3 times, one can switch between these two modes.
A 40W Output Wattage, 2300mAh Battery Capacity, Temperature Protection Feature and 510 Spring Loaded Connector are all packed into this tiny regulated box mod. The Presa is charged via a USB port. It will take about 3-3.5 hours to fully charge the battery with 1A charger. The battery power symbol on the OLED screen will flash slowly during charging. The battery power symbol will turn off when the battery is fully charged. If you are looking for a compact box mod for daily use this is what you’re looking for.
Note: The trigger lock must be switched on to the turn the device on.
ALL SALES ARE FINAL ON THIS CLEARANCE DEAL
***Does not include micro USB charging cord***
***Packaging may vary***
Features and Specs:
Colors: Silver, Black
Battery Capacity: 2600mAh
Rated Output Wattage: 5W-40W
Rated Output Voltage: 2V-10V
Rated Resistance Range:0.2ohm-5.0ohm
1× Presa 40W
Improving on the fantastic success of the DOGE V1 and V2 is the DOG3. Congrevape has improved every aspect of the previous designs. The DOG3 RDA is a 22mm industry standard RDA and it keeps the same great Doge high quality and affordability. Available in 5 color combinations to suit any aesthetic desires. The ceramic drip tip will ensure you never have a chance to burn your lips or inhale melted plastic. More space on the deck to build any coil of your choice is a great upgrade along with the option to use 3 or 4 posts. A very nice addition to any collection.
Color options – Matte Black with Yellow, Blue, Green or Pink and Hot Pink with black DOG3 logo
These are 100% authentic with scratch code verification
Features and Specs:
Ceramic drip tip
3 or 4 post design
2mm post holes
Copper and Stainless steel spares included
Copper contact pin
304 Stainless Steel
Adjustable air flow control
DOG3 22mm RDA
Spare parts – Screws, center post, O-rings, insulators and screwdrivers
The Kangertech DRIPBOX 60W Starter Kit is the newest offering from KangerTech. It is a fully integrated system that combining the RDA and Squonker mod into a simple package. The RDA sits atop the 7mL juice tank and uses a single 18650 battery to make this a true all in one platform. The two-post dripping coil is wet by a simple squeeze of the juice bottle under the atomizer creating an easy to use and relatively leakproof system. Single button operation, capable of firing up to 60W, as low as 0.2Ω and packed with all the standard protections makes this starter kit innovative and hassle-free operation.
Kanger DRIPBOX 60W Starter Kit Features:
- 7mL Juice Capacity
- Single 18650 Battery (Sold Separately)
- Maximum Wattage Output: 60W
- Minimum Atomizer Resistance: 0.2ohm
- All-In-One Design – Rebuildable Squonker-Style Platform
- Single Button Operation
- Special Battery Cover Design
- Bottom-Feed Juice Design
- Squeeze Juice Section for Dripping
- Replaceable Dripping Coil
- Two-Post Design
- Single Adjustable Airflow Control
- Kanger Authenticity Code